TPE membrane plates
The catalogue describes TPE membranes for the secondary squeeze stage. Plate dimensions and chamber capacity vary across the supplied reference rows; the photographed machine has not been assigned to an exact row.
Client-selected product photographs. Exact model and supplied configuration require confirmation.
Pressure filtration · Secondary squeezing
Membrane Filter Press
Separate the liquid through filter media, then squeeze the retained cake with membrane plates. Review the available equipment photographs, catalogue configuration and reference parameter rows before defining your model.
- Separation process
- Pressure filtration followed by membrane squeezing
- Membrane material
- TPE described in the supplied catalogue
- Model selection
- Material testing and configuration confirmation required
Membrane series
Filtration, followed by a second squeeze.
First, form the cake.
The feed enters the filter chambers under pressure. Liquid passes through the filter media and leaves the press, while the solids remain in the chambers as filter cake.
Then, apply the squeeze.
The catalogue describes a second stage in which the membranes press against the cake to remove additional liquid. The result depends on the material, filtration conditions, selected media and squeeze configuration.
Source: Automatic Membrane Filter Press catalogue, operating principle and equipment description. No cycle-time, final-moisture or savings figure is asserted.
Understand the configuration.
Squeeze medium options
Air, inert gas, water and oil are mentioned as squeeze media in the catalogue. The appropriate medium, supply arrangement and permitted conditions must be confirmed for the selected equipment and process.
Frame and surface preparation
A Q345B carbon-steel frame and sandblasted surface preparation are described. Confirm the actual frame material, coating and corrosion requirements in the model-specific offer.
Washing arrangement
The catalogue illustrates a double-rod washing arrangement. Its presence in the catalogue does not establish that it is included with every model or with the photographed configuration.
Review the source parameters.
32 source rows
Scroll the table sideways to view all columns on a small screen.
| Source row ID¹ | Area (m²) | Plate size (mm) | Cake thickness (mm) | Chamber volume (L) | Plate count | Motor (kW) | Source weight (kg) | L × W × H (mm) |
|---|---|---|---|---|---|---|---|---|
| 30/870 | 30 | 870 × 870 | ≤ 35 | 498 | 23 | 2.2 | 3046 | 3880×1350×1230 |
| 40/870 | 40 | 870 × 870 | ≤ 35 | 623 | 29 | 2.2 | 3593 | 4270×1350×1230 |
| 50/870 | 50 | 870 × 870 | ≤ 35 | 789 | 37 | 2.2 | 4057 | 4790×1350×1230 |
| 60/870 | 60 | 870 × 870 | ≤ 35 | 955 | 45 | 2.2 | 4597 | 5310×1350×1230 |
| 70/870 | 70 | 870 × 870 | ≤ 35 | 1121 | 53 | 2.2 | 5136 | 5830×1350×1230 |
| 80/870 | 80 | 870 × 870 | ≤ 35 | 1287 | 61 | 2.2 | 5636 | 6350×1350×1230 |
| 50/1000 | 50 | 1000 × 1000 | ≤ 35 | 776 | 27 | 4 | 4352 | 4270×1500×1360 |
| 60/1000 | 60 | 1000 × 1000 | ≤ 35 | 943 | 33 | 4 | 4480 | 4770×1500×1360 |
| 70/1000 | 70 | 1000 × 1000 | ≤ 35 | 1109 | 39 | 4 | 5263 | 5130×1500×1360 |
| 80/1000 | 80 | 1000 × 1000 | ≤ 35 | 1275 | 45 | 4 | 5719 | 5560×1500×1360 |
| 100/1000 | 100 | 1000 × 1000 | ≤ 35 | 1608 | 57 | 4 | 6555 | 6410×1500×1360 |
| 120/1000 | 120 | 1000 × 1000 | ≤ 35 | 1941 | 69 | 4 | 7466 | 7260×1500×1360 |
| 80/1250 | 80 | 1250 × 1250 | ≤ 40 | 1560 | 29 | 5.5 | 10900 | 4830×1800×1600 |
| 100/1250 | 100 | 1250 × 1250 | ≤ 40 | 1975 | 37 | 5.5 | 11750 | 5440×1800×1600 |
| 120/1250 | 120 | 1250 × 1250 | ≤ 40 | 2391 | 45 | 5.5 | 12600 | 6060×1800×1600 |
| 150/1250 | 150 | 1250 × 1250 | ≤ 40 | 2911 | 55 | 5.5 | 13620 | 6820×1800×1600 |
| 160/1250 | 160 | 1250 × 1250 | ≤ 40 | 3119 | 59 | 5.5 | 14470 | 7130×1800×1600 |
| 200/1250 | 200 | 1250 × 1250 | ≤ 40 | 3847 | 73 | 5.5 | 15320 | 8200×1800×1600 |
| 240/1250 | 240 | 1250 × 1250 | ≤ 40 | 4679 | 89 | 5.5 | 16170 | 9420×1800×1600 |
| 250/1250 | 250 | 1250 × 1250 | ≤ 40 | 4783 | 91 | 5.5 | 17020 | 9570×1800×1600 |
| 200/1500 | 200 | 1500 × 1500 | ≤ 40 | 3809 | 49 | 11 | 26120 | 7140×2200×1820 |
| 250/1500 | 250 | 1500 × 1500 | ≤ 40 | 4723 | 61 | 11 | 26930 | 7730×2200×1820 |
| 300/1500 | 300 | 1500 × 1500 | ≤ 40 | 5637 | 73 | 11 | 28160 | 8720×2200×1820 |
| 350/1500 | 350 | 1500 × 1500 | ≤ 40 | 6551 | 85 | 11 | 29600 | 10110×2200×1820 |
| 400/1500 | 400 | 1500 × 1500 | ≤ 40 | 7618 | 99 | 11 | 31500 | 11260×2200×1820 |
| 450/1500 | 450 | 1500 × 1500 | ≤ 40 | 8532 | 111 | 11 | 33400 | 12250×2200×1820 |
| 500/1500 | 500 | 1500 × 1500 | ≤ 40 | 9446 | 123 | 11 | 33380 † | 13240×2200×1820 |
| 600/2000 | 600 | 2000 × 2000 | ≤ 40 | 11901 | 85 | 15 | 54164 | 13030×3000×2500 |
| 700/2000 | 700 | 2000 × 2000 | ≤ 40 | 13838 | 99 | 15 | 58300 | 14390×3000×2500 |
| 800/2000 | 800 | 2000 × 2000 | ≤ 40 | 14945 | 107 | 15 | 62460 | 15770×3000×2500 |
| 900/2000 | 900 | 2000 × 2000 | ≤ 40 | 17713 | 127 | 15 | 66620 | 17150×3000×2500 |
| 1000/2000 | 1000 | 2000 × 2000 | ≤ 40 | 19651 | 141 | 15 | 70780 | 18530×3000×2500 |
¹ Row identifiers are reference labels. They combine the source filtration area and plate size. Unclear model-code suffixes have not been reconstructed; confirm the exact model designation separately.
† Source value needs verification. The 500/1500 row prints a weight of 33,380 kg, while the preceding 450/1500 row prints 33,400 kg. Both values are retained as printed and must be checked with the supplier.
Pressure is deliberately excluded from this comparison. The catalogue and parameter sheet describe pressure differently. See the pressure note below before using any source pressure value.
Source: the supplied membrane parameter sheet, pages 1–2. Figures are transcribed source values. Please obtain a model-specific specification and drawing before selection or installation.
Pressure is configuration-specific.
Resolve the pressure definitions.
The catalogue and parameter sheet do not provide a consistent basis for comparing feed pressure, membrane squeeze pressure and maximum or design pressure. A single verified operating rating cannot yet be assigned to this page.
Confirm these pressure definitions and the corresponding equipment configuration in a written, model-specific specification.
Before equipment selection
Provide the feed material, solids content, temperature, chemistry, required cake condition and intended throughput. Confirm media compatibility, pressure limits and the supporting utilities for that process.
No universal moisture, capacity, cycle time, delivery time or warranty commitment is supplied here.
Look at the plates. Confirm the interfaces.
Request the selected model’s documents.
The supplied plate photograph helps explain the component family. A model-matched general arrangement, connection schedule, foundation information and maintenance manual are still required.
Awaiting confirmation: dimensional drawing, feed and filtrate connections, squeeze-medium interfaces, plate and cloth replacement procedure, cleaning guidance and installation requirements. This preview does not provide operating instructions.
Start with the process material.
Mineral and industrial streams
The catalogue lists concentrate and tailings processing, metallurgy, chemicals and ceramics.
Wastewater and viscous materials
Listed uses include sewage treatment, municipal wastewater, printing and dyeing wastewater, fine chemicals and other viscous materials.
Process industries
Pharmaceutical and food applications are also mentioned. Suitability, contact materials and any hygiene requirements need process-specific verification.
These are application areas described in the catalogue, not proof of performance for every material. Share a representative sample and the separation objective when discussing suitability.
Evidence for the selected model.
Factory and equipment photographs are available in the supplied materials. A model-matched project record and complete certificate scope have not yet been verified.
Awaiting confirmation: certificate annex and applicable models, complete ISO evidence, project dates, photograph attribution and measured results. No certification badge or performance result is asserted here.
View the limited customer display examples →Discuss the support you need.
Gaode Equipment provides engineering services alongside equipment sales. The scope and responsibilities need to be agreed for your project.
Discuss engineering requirementsScope awaiting confirmation
Process design, system integration, installation, commissioning, service locations, delivery times and warranty terms are not included as assumed commitments.
Tell us about your material.
Share the material, process conditions, intended separation and project location. Tell us which specifications you need to resolve.
Online delivery is not enabled in this preview. The form checks your entries; it does not send an inquiry.
