Circular Filter Press, supplied photograph 1 of 2

Circular Filter Press, supplied photograph 2 of 2

Slide 1 of 2

Client-selected product photographs. Exact model and supplied configuration require confirmation.

Circular plates · Hydraulic compression

Circular Filter Press

The round-plate catalogue describes a circular filter-plate family for finer-particle applications, including ceramics and kaolin. Confirm the selected model, material and pressure definitions before specifying the equipment.

Plate configuration: Circular plates described in the catalogue
Closing: Hydraulic compression and pressure retention described
Source table: Seven reference rows; 60 m² weight awaiting verification

Discuss this equipment Compare the six equipment families →

A circular plate family for closer review.

A round-plate filtration family

The catalogue introduces this equipment for finer-particle materials and names ceramics and kaolin as examples. The family name describes plate geometry; a filename such as Ceramic Filter Press does not establish the plate’s material composition.

Confirm the closing arrangement.

Hydraulic compression and automatic pressure retention are described. Verify how the selected model closes, filters and discharges, including the required feed and utility interfaces.

Understand this equipment family.

Circular plate geometry

The source describes round plates and a point-shaped conical-boss design. The actual plate material and configuration must be identified for the selected equipment.

Hydraulic compression

The catalogue describes hydraulic closing and automatic pressure retention. Confirm the closing-system pressure separately from filtration pressure.

Media and washing requirements

The catalogue discusses cake dewatering, washing and sealing performance. Define those needs for the actual material; no filtration speed, final moisture, washing result or universal sealing guarantee is established by the supplied evidence.

Review the source parameters.

View plate size

7 source rows

Scroll sideways to view all table columns. Confirm the exact model and configuration before using these reference figures.

Supplied source rows — not a binding specification for the photographed machine
Source row ID¹	Area (m²)	Plate size (mm)	Cake thickness (mm)	Chamber volume (L)	Plate count	Source weight (kg)	L × W × H (mm)
20/800	20	Ø 800	25	255	20	3346	3300×1100×1060
30/800	30	Ø 800	25	377	30	3590	3780×1100×1060
40/800	40	Ø 800	25	499	40	4554	4300×1100×1060
50/800	50	Ø 800	25	621	50	5150	4820×1100×1060
60/800	60	Ø 800	25	753	60	9710 †	5340×1100×1060
70/800	70	Ø 800	25	875	70	5760	5860×1100×1060
80/800	80	Ø 800	25	1000	80	6860	6200×1100×1060

¹ Reference row labels. Area and plate dimension identify a source row. Unclear model-code suffixes have not been reconstructed.

† 60 m² source weight needs verification. The sheet prints 9,710 kg, between 5,150 kg for the 50 m² row and 5,760 kg for the 70 m² row. The value is retained as printed and flagged; it has not been corrected by assumption.

The sheet describes an 800 mm circular plate dimension and 25 mm cake thickness for these rows. Row labels are reference area/plate labels, not complete model codes.

The table’s filtration-pressure range, the catalogue’s filtration statement and the hydraulic-compression figure describe different or unconfirmed limits. They are not combined into a single rating.

Source: the supplied Circular Filter Press parameter sheet, page1. Overall dimensions are source values; foundation figures are not used as installation instructions. Pressure ratings require model-specific verification.

Resolve the model-specific limits.

Separate filtration and closing pressures.

The parameter sheet prints 1.0–1.2 MPa for filtration pressure; the catalogue mentions filtration up to 2 MPa and hydraulic compression up to 25 MPa. Confirm model, definitions and actual permitted limits before using any of these source figures.

Material and model limits remain open

Plate composition, media, chemical compatibility, temperature and the 60 m² source weight require confirmation. The source’s generic chemical-resistance, non-toxicity and performance claims are not adopted as universal promises.

Structure, installation and care.

Define the round pack and interfaces.

The photographs show the client-selected circular family. A matched drawing is still needed for the plate pack, closing system, feed/filtrate connections and installation footprint.

Installation and care documents pending

Dimensioned arrangement, foundation/connection schedule, operating limits, discharge method, plate/cloth replacement and cleaning/maintenance instructions. Source foundation numbers are not installation approval.

Start with the actual material.

Ceramics and kaolin

The introduction lists ceramics, including bone porcelain, electrical porcelain and ornamental porcelain, together with kaolin, in its discussion of finer particles.

Broader application list not verified

A later paragraph names a program-controlled automatic chamber press. That copied paragraph is not used as circular-family evidence. Other applications require material-specific confirmation.

Evidence for the selected model.

Factory and equipment photographs are available in the supplied materials. A model-matched project record and complete certificate scope have not yet been verified.

Awaiting confirmation: certificate annex and applicable models, complete ISO evidence, project dates, photograph attribution and measured results. No certification badge or performance result is asserted here.

View the limited customer display examples →

Discuss the support you need.

Gaode Equipment provides engineering services alongside equipment sales. The scope and responsibilities need to be agreed for your project.

Discuss engineering requirements

Scope awaiting confirmation

Process design, system integration, installation, commissioning, service locations, delivery times and warranty terms are not included as assumed commitments.